Home / All / Pipe Butt Fusion Machines / Hydraulic Butt Fusion Welder /

SWT-V450 200-450mm Welding Range Butt Fusion Welding Machine For PVC, PE, PP, PVDF | MM-Tech

SWT-V450 200-450mm Welding Range Butt Fusion Welding Machine For PVC, PE, PP, PVDF | MM-Tech

SWT-V450 200-450mm Welding Range Butt Fusion Welding Machine For PVC, PE, PP, PVDF | MM-Tech
SWT-V450 200-450mm Welding Range Butt Fusion Welding Machine For PVC, PE, PP, PVDF | MM-TechSWT-V450 200-450mm Welding Range Butt Fusion Welding Machine For PVC, PE, PP, PVDF | MM-TechSWT-V450 200-450mm Welding Range Butt Fusion Welding Machine For PVC, PE, PP, PVDF | MM-TechSWT-V450 200-450mm Welding Range Butt Fusion Welding Machine For PVC, PE, PP, PVDF | MM-TechSWT-V450 200-450mm Welding Range Butt Fusion Welding Machine For PVC, PE, PP, PVDF | MM-Tech
CategoriesHydraulic Butt Fusion Welder
BrandMM-Tech Thermoplastic Welding Equipment Manufactur
ModelSWT-V450
CertificateCE, ISO9001
Packing Material1 Set
MOQPlywood Box
FOB portGuangZhou
Terms of PaymentL/C, T/T
Update TimeNov 8,2024
Detail Information
product poster
Detail Information
Hydraulic Butt Fusion Machine SWT-V450H  200MM-450MM
(8" IPS -18'' IPS) Product Details

WELDING RANGE O.D.
200MM - 450MM
PISTON AREA
22.37cm²
POWER SUPPLY
380V±110%, 50/60HZ
TEMPERATURE RANGE
MAX. 320ºC
HEATER POWER
5.38KW
PACKING DIMENSION
1300*840*840 MM
TRIMMER POWER
1.5KW
820*600*1100 MM
PUMP POWER
1.5KW
710*340*400 MM
WORKING PRESSURE RANGE
0 - 120 BAR
GROSS WEIGHT
493KGS
Product Specification
Product Features
Basic Frame
- Oil seal kit, origins from Germany, make sure that the pressure
performance stays in more stable way.

- 4sets quick coupling helps operator to prepare the machine better
before and after welding, and we use STUCCHI which from Italy
ensures no hydraulic oil leakages when unplug or plug in.

- Using integral shaft(top chromate treatment) instead of
assembled shaft, ensure the chassis strength to avoid possible
frame twist or deform when dragging the pipe with extreme parameters.


Heating Plate
- We use Dupont from the USA for coating the heating plate, which is the best in the industry. It's many stickers on an aluminum plate, more 
non-sticky to plastic pipes surface. The temperature deviation of different
 points on the heating plate is 2-3 degrees (small size machine) and 5-6 degrees (big size machine). 

Trimmer
- High-quality drill, which can do 220V, 3phase as an option.

Electrical box Assy
- Temperature-controlled switch when the temperature-controlled switch is off, all the aviation plugs are not live, even the power cable connected with the power source. It is quote safe to connect or disconnect the plugs before or after welding.

- Very well-connected wires and a more reasonable layout. Each wire is
 marked with the corresponding numbers, thus giving more convenience 
to do the troubleshooting when a failure happens.



Hydraulic Power Station
- Solid relays have a bigger load capacity and working in a more stable 
situation, which has a much longer life.

- The circuit breaker works with an electricity leakage protection switch. I
ncluding the earth wires, there're 2 elements to activate the protection when 
electricity is leaking.

- Non-fan motor (small size machines), waterproof, sand-proof, and 
dust-proof at a higher level. The motor provides sufficient/full power to 
provide support for hydraulic power.

Support
- Ergonomic design

Welded Thermoplastic Tube Type
Welding Type
Steps For Usage
Welding Type
Review
  • Loading...
Request a Quote
Fill all information details to consultwith us to get sevices from us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Extrusion Welder
MM-TECH
Butt Fusion Machines

Hdpe Pipe Welding Machine

www.peweldingmachine.com
WhatsApp
Pe Welding Machine
Wechat
Sheet Butt Fusion Welding Machine